Select the PPP icon and set the IP Address to 0.0.0.0

Then click " More "

The following screen will open:

Click on the Obtain Address " Manually " bullet and then select " C " from the Class pull down menu.

Under Domain Name Server Information, go to the two boxes directly under Domain and type a full stop " . " in each.

Under IP Address, type " 212.1.128.165 " in the first box then type " 212.1.128.156 " in the second box.

Under Default, check the top bullet.

In Routing Information, Gateway Address, type " 212.1.128.254 " in the box.

Return to Obtain Address and bullet " Server ". Click OK and close Mac TCP.

Open " Config PPP " from Control Panels

Your Config PPP control panel may look slightly different but everything should work the same.

Click the button " New... "

PPP server name: type " ecosse.net "

Click OK and then click the " Config... " button

The Port Speed should be set to your modem speed.

Flow Control: " CTS&RTS (DTR) "

Bullet : " Tone dial "

Add the correct telephone number for your type of modem:

0845 6621034 for Standard modems
0845 6621134 for K-Flex modems
0845 6621534 for V90 modems
0845 6621334 for 64k ISDN
0845 6621434 for 128k ISDN

then click " Connect Script... "

Set the Connect Script panel to look like the picture below and then click the " OK " button.

Next click on the Authentication button and add the:

Auth.ID: scot and the Password: free

The Password field hides the text for security reasons behind bullet points.

Make sure you type it exactly using all lower caser characters and then press OK

You are now ready to connect to the net.

Use the Open and Close buttons in Config PPP to start and stop your connection.